Anytime Tools 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE Review

I ordered these hole saws because I wanted to convert a Wine bottle into a lamp.
Unlike the other reviewers I used a wood clamp to hold the bottle on my Drill press. It is recommended to use them at 300 RPM, but my drill press only goes down to 500. I used a small water spritster to wet the area and occasionally add water to the cut. The hole saw worked well in this application.
The problem with using a hole saw without an Arbor is that it will "Wander" and not make a clean initial cut. Once the hole is started it is fine. That is why I used the clamp and drill press. I also wanted to save all of the labels on the bottle, so I minimized the amount of water used. I did also cover the labels with shrink wrap and masking tape to protect them from accidental water damage.

Click Here to see more reviews about: Anytime Tools 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE

Product Description:
The diamond coating on these saws give superior performance and life. Excellent results in glass, marble, slate, and tile. Nickel plated.Segmented design works better and lasts longer.Sizes (Shank diameter: 1/4"): 3/4" 1" 1-3/16" 1-3/8" 1-5/8"Note: To prolong the life of these bits, use on a low speed with coolant (water/oil)

Buy cheap Anytime Tools 5 DIAMOND DUST HOLE SAW for TILE GLASS MARBLE now Get 50% OFF